Use iscsistart from system, don't compile it

defaults/initrd.scripts

@@ -754,7 +754,6 @@ startVolumes() {
 }
 
 startiscsi() {
-	
 	if [ ! -n "${ISCSI_NOIBFT}" ]
 	then
 		good_msg "Activating iSCSI via iBFT"
@@ -771,7 +770,6 @@ startiscsi() {
 		else
 			ADDITIONAL="${ADDITIONAL} -g 1"
 		fi
-		
 		if [ "${ISCSI_PORT}" ]
 		then
 			ADDITIONAL="${ADDITIONAL} -p ${ISCSI_PORT}"
@@ -802,14 +800,15 @@ startiscsi() {
 			ADDITIONAL="${ADDITIONAL} -d ${ISCSI_DEBUG}"
 		fi
 
-		iscsistart -i "${ISCSI_INITIATORNAME}" -t "${ISCSI_TARGET}" -a "${ISCSI_ADDRESS}" ${ADDITIONAL}
+		iscsistart -i "${ISCSI_INITIATORNAME}" -t "${ISCSI_TARGET}" \
+			-a "${ISCSI_ADDRESS}" ${ADDITIONAL}
 
-		# let iscsid settle - otherwise mounting the iSCSI-disk will fail (very rarely, though)
+		# let iscsid settle - otherwise mounting the iSCSI-disk
+		# will fail (very rarely, though)
 		sleep 1
 	fi
 }
 
-
 # Open a LUKS device
 # It is either the root or a swap, other devices are supported in the scripts provided with sys-fs/cryptsetup-luks
 # $1 - root/swap

defaults/linuxrc

@@ -372,7 +372,7 @@ sdelay
 cd /
 
 # Start iSCSI
-if [ -e /bin/iscsistart ]
+if [ -e /usr/sbin/iscsistart ]
 then
 	startiscsi
 fi

defaults/software.sh

@@ -13,8 +13,3 @@ BUSYBOX_VER="${BUSYBOX_VER:-VERSION_BUSYBOX}"
 BUSYBOX_SRCTAR="${BUSYBOX_SRCTAR:-${DISTDIR}/busybox-${BUSYBOX_VER}.tar.bz2}"
 BUSYBOX_DIR="${BUSYBOX_DIR:-busybox-${BUSYBOX_VER}}"
 BUSYBOX_BINCACHE="${BUSYBOX_BINCACHE:-%%CACHE%%/busybox-${BUSYBOX_VER}-%%ARCH%%.tar.bz2}"
-
-ISCSI_VER="${ISCSI_VER:-VERSION_ISCSI}"
-ISCSI_DIR="${ISCSI_DIR:-open-iscsi-${ISCSI_VER}}"
-ISCSI_SRCTAR="${ISCSI_SRCTAR:-${DISTDIR}/open-iscsi-${ISCSI_VER}.tar.gz}"
-ISCSI_BINCACHE="${ISCSI_BINCACHE:-%%CACHE%%/iscsi-${ISCSI_VER}-%%ARCH%%.bz2}"

gen_compile.sh

@@ -402,53 +402,3 @@ compile_busybox() {
 		rm -rf "${BUSYBOX_DIR}" > /dev/null
 	fi
 }
-
-compile_iscsi() {
-	if [ ! -f "${ISCSI_BINCACHE}" ]
-	then
-		[ ! -f "${ISCSI_SRCTAR}" ] &&
-			gen_die "Could not find iSCSI source tarball: ${ISCSI_SRCTAR}. Please place it there, or place another version, changing /etc/genkernel.conf as necessary!"
-		cd "${TEMP}"
-		rm -rf "${ISCSI_DIR}"
-		tar -zxpf "${ISCSI_SRCTAR}"
-		[ ! -d "${ISCSI_DIR}" ] &&
-			gen_die "ISCSI directory ${ISCSI_DIR} invalid"
-				print_info 1 'iSCSI: >> Compiling...'
-		cd "${TEMP}/${ISCSI_DIR}"
-		apply_patches iscsi ${ISCSI_VER}
-
-		# Only build userspace
-		print_info 1 'iSCSI: >> Configuring userspace...'
-		cd utils/open-isns || gen_die 'Could not enter open-isns dir'
-		# we currently have a patch that changes configure.ac
-		# once given patch is dropped, drop autoconf too
-		autoconf || gen_die 'Could not tweak open-iscsi configuration'
-		./configure --without-slp >> ${LOGFILE} 2>&1 || gen_die 'Could not configure userspace'
-		cd ../.. || gen_die 'wtf?'
-		MAKE=${UTILS_MAKE} compile_generic "user" ""
-
-		# if kernel modules exist, copy them to initramfs, otherwise it will be compiled into the kernel
-		mkdir -p "${TEMP}/initramfs-iscsi-temp/lib/modules/${KV}/kernel/drivers/scsi/"
-		for modname in iscsi_tcp libiscsi scsi_transport_iscsi
-		do
-			if [ -e "${CMD_KERNEL_DIR}/drivers/scsi/${modname}.ko" ]
-			then
-				cp ${CMD_KERNEL_DIR}/drivers/scsi/${modname}.ko "${TEMP}/initramfs-iscsi-temp/lib/modules/${KV}/kernel/drivers/scsi/"
-			fi
-		done
-
-	        cd "${TEMP}/initramfs-iscsi-temp/"
-		print_info 1 'iscsistart: >> Copying to cache...'
-		[ -f "${TEMP}/${ISCSI_DIR}/usr/iscsistart" ] ||
-			gen_die 'iscsistart executable does not exist!'
-		strip "${TEMP}/${ISCSI_DIR}/usr/iscsistart" ||
-			gen_die 'Could not strip iscsistart binary!'
-		bzip2 "${TEMP}/${ISCSI_DIR}/usr/iscsistart" ||
-			gen_die 'bzip2 compression of iscsistart failed!'
-		mv "${TEMP}/${ISCSI_DIR}/usr/iscsistart.bz2" "${ISCSI_BINCACHE}" ||
-			gen_die 'Could not copy the iscsistart binary to the package directory, does the directory exist?'
-
-		cd "${TEMP}"
-		rm -rf "${ISCSI_DIR}" > /dev/null
-	fi
-}

gen_determineargs.sh

@@ -141,13 +141,11 @@ determine_real_args() {
 
 	CACHE_DIR=`arch_replace "${CACHE_DIR}"`
 	BUSYBOX_BINCACHE=`cache_replace "${BUSYBOX_BINCACHE}"`
-	ISCSI_BINCACHE=`cache_replace "${ISCSI_BINCACHE}"`
 	BLKID_BINCACHE=`cache_replace "${BLKID_BINCACHE}"`
 
 	DEFAULT_KERNEL_CONFIG=`arch_replace "${DEFAULT_KERNEL_CONFIG}"`
 	BUSYBOX_CONFIG=`arch_replace "${BUSYBOX_CONFIG}"`
 	BUSYBOX_BINCACHE=`arch_replace "${BUSYBOX_BINCACHE}"`
-	ISCSI_BINCACHE=`arch_replace "${ISCSI_BINCACHE}"`
 	BLKID_BINCACHE=`arch_replace "${BLKID_BINCACHE}"`
 
 	if [ -n "${CMD_BOOTLOADER}" ]

gen_initramfs.sh

@@ -242,19 +242,18 @@ append_iscsi(){
 	then
 		rm -r "${TEMP}/initramfs-iscsi-temp/"
 	fi
-	print_info 1 'iSCSI: Adding support (compiling binaries)...'
+	print_info 1 'iSCSI: Adding support (copying binaries from system)...'
-	compile_iscsi
+
-	cd ${TEMP}
+	mkdir -p "${TEMP}/initramfs-iscsi-temp/usr/sbin/"
-	mkdir -p "${TEMP}/initramfs-iscsi-temp/bin/"
+
-	/bin/bzip2 -dc "${ISCSI_BINCACHE}" > "${TEMP}/initramfs-iscsi-temp/bin/iscsistart" ||
+	copy_binaries /usr/sbin/iscsistart
-		gen_die "Could not extract iscsi binary cache!"
+
-	chmod a+x "${TEMP}/initramfs-iscsi-temp/bin/iscsistart"
+	cd "${TEMP}/initramfs-iscsi-temp"
-	cd "${TEMP}/initramfs-iscsi-temp/"
 	log_future_cpio_content
 	find . -print | cpio ${CPIO_ARGS} --append -F "${CPIO}" \
 			|| gen_die "compressing iscsi cpio"
 	cd "${TEMP}"
-	rm -rf "${TEMP}/initramfs-iscsi-temp" > /dev/null
+	rm -r "${TEMP}/initramfs-iscsi-temp/"
 }
 
 append_lvm(){

patches/iscsi/2.0-872/open-iscsi-2.0.872-omg-calling-configure.patch

@@ -1,11 +0,0 @@
---- open-iscsi-2.0-872.orig/Makefile
-+++ open-iscsi-2.0-872/Makefile
-@@ -27,7 +27,7 @@ IFACEFILES = etc/iface.example
- all: user kernel
- 
- user: ;
--	cd utils/open-isns; ./configure; $(MAKE)
-+	cd utils/open-isns; $(MAKE)
- 	$(MAKE) -C utils/sysdeps
- 	$(MAKE) -C utils/fwparam_ibft
- 	$(MAKE) -C usr