defaults/initrd.d/00-crypt.sh

@@ -121,6 +121,12 @@ _open_luks() {
             [ -n "${luks_dev}" ] && \
                 luks_device="${luks_dev}"  # otherwise hope...
 
+            eval "${CRYPTSETUP_BIN} isLuks ${luks_device}" || {
+                bad_msg "${luks_device} does not contain a LUKS header"
+                dev_error=1
+                continue;
+            }
+
             # Handle keys
             if [ "${luks_trim}" = "yes" ]; then
                 good_msg "Enabling TRIM support for ${luks_dev_name}."
@@ -187,30 +193,13 @@ _open_luks() {
                         bad_msg "{luks_key} on ${real_luks_keydev} not found."
                         continue
                     fi
-                    good_msg "${luks_key} on device ${real_luks_keydev} found."
-
-                    if [ ! -e "${mntkey}/header.img" ]; then
-                        umount -n "${mntkey}"
-                        key_error=1
-                        keydev_error=1
-                        bad_msg "header.img on ${real_luks_keydev} not found."
-                        continue
-                    fi
-                    good_msg "header.img on device ${real_luks_keydev} found."
-
-                    eval "${CRYPTSETUP_BIN} isLuks ${mntkey}/header.img" || {
-                      bad_msg "${mntkey}/header.img does not contain a LUKS header"
-                      dev_error=1
-                      continue;
-                    }
-                    good_msg "LUKS header in ${mntkey}/header.img found."
-
                 fi
 
                 # At this point a candidate key exists
                 # (either mounted before or not)
+                good_msg "${luks_key} on device ${real_luks_keydev} found"
                 if [ "$(echo ${luks_key} | grep -o '.gpg$')" = ".gpg" ] && \
-                    [ -e /usr/bin/staticgpg ]; then
+                    [ -e /usr/bin/gpg ]; then
 
                     # TODO(lxnay): WTF is this?
                     [ -e /dev/tty ] && mv /dev/tty /dev/tty.org
@@ -218,10 +207,10 @@ _open_luks() {
 
                     cryptsetup_opts="${cryptsetup_opts} -d -"
                     # if plymouth not in use, gpg reads keyfile passphrase...
-                    gpg_tty_cmd="/usr/bin/staticgpg --logger-file /dev/null"
+                    gpg_tty_cmd="/usr/bin/gpg --logger-file /dev/null"
                     gpg_tty_cmd="${gpg_tty_cmd} --quiet --decrypt ${mntkey}${luks_key} | "
                     # but when plymouth is in use, keyfile passphrase piped in
-                    gpg_ply_cmd="/usr/bin/staticgpg --logger-file /dev/null"
+                    gpg_ply_cmd="/usr/bin/gpg --logger-file /dev/null"
                     gpg_ply_cmd="${gpg_ply_cmd} --quiet --passphrase-fd 0 --batch --no-tty"
                     gpg_ply_cmd="${gpg_ply_cmd} --decrypt ${mntkey}${luks_key} | "
                 else
@@ -233,10 +222,8 @@ _open_luks() {
             # At this point, keyfile or not, we're ready!
             local ply_cmd="${gpg_ply_cmd}${CRYPTSETUP_BIN}"
             local tty_cmd="${gpg_tty_cmd}${CRYPTSETUP_BIN}"
-
-            # Using hard-coded remote header, which is at the same place as the key.
-            ply_cmd="${ply_cmd} ${cryptsetup_opts} --header=${mntkey}/header.img  luksOpen ${luks_device} ${luks_dev_name}"
-            tty_cmd="${tty_cmd} ${cryptsetup_opts} --header=${mntkey}/header.img  luksOpen ${luks_device} ${luks_dev_name}"
+            ply_cmd="${ply_cmd} ${cryptsetup_opts} luksOpen ${luks_device} ${luks_dev_name}"
+            tty_cmd="${tty_cmd} ${cryptsetup_opts} luksOpen ${luks_device} ${luks_dev_name}"
             # send to a temporary shell script, so plymouth can
             # invoke the pipeline successfully
             local ply_cmd_file="$(mktemp -t "ply_cmd.XXXXXX")"

defaults/linuxrc

@@ -294,14 +294,14 @@ cd /
 
 start_iscsi
 
+start_volumes
+zfs_start_volumes
+
 setup_keymap
 
 # Initialize LUKS root device except for livecd's
 is_livecd || start_luks
 
-start_volumes
-zfs_start_volumes
-
 # Initialize resume from hibernation
 is_livecd || resume_init
 

ebuilds/genkernel-denes-60.ebuild

@@ -1,88 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-kernel/genkernel-next/genkernel-next-60.ebuild,v 1.1 2015/01/20 08:25:58 lxnay Exp $
-
-EAPI=5
-
-#if [[ "${PV}" != "9999" ]]; then
-#	SRC_URI="http://dev.gentoo.org/~lxnay/genkernel-next/${P}.tar.xz"
-#else
-#	EGIT_REPO_URI="git://github.com/Sabayon/genkernel-next.git"
-#	inherit git-2
-#fi
-EGIT_REPO_URI="git://github.com/cs0rbagomba/genkernel-next.git"
-EGIT_MASTER="denes"
-inherit git-2
-
-inherit bash-completion-r1 eutils
-
-#if [[ "${PV}" == "9999" ]]; then
-#	KEYWORDS=""
-#else
-#	KEYWORDS="~alpha ~amd64 ~arm ~ia64 ~x86"
-#fi
-KEYWORDS="~amd64"
-
-#DESCRIPTION="Gentoo automatic kernel building scripts, reloaded"
-#HOMEPAGE="http://www.gentoo.org"
-DESCRIPTION="Fork of genkernel-next with sakaki's staticgpg and remote LUKS header."
-HOMEPAGE="https://github.com/cs0rbagomba/genkernel-next/"
-
-
-LICENSE="GPL-2"
-SLOT="0"
-RESTRICT=""
-#IUSE="cryptsetup dmraid gpg iscsi plymouth selinux"
-IUSE="cryptsetup staticgpg zfs selinux"
-
-
-DEPEND="app-text/asciidoc
-	sys-fs/e2fsprogs
-	!sys-fs/eudev[-kmod,modutils]
-	selinux? ( sys-libs/libselinux )"
-
-#RDEPEND="${DEPEND}
-#	!sys-kernel/genkernel
-#	cryptsetup? ( sys-fs/cryptsetup )
-#	dmraid? ( >=sys-fs/dmraid-1.0.0_rc16 )
-#	gpg? ( app-crypt/gnupg )
-#	iscsi? ( sys-block/open-iscsi )
-#	plymouth? ( sys-boot/plymouth )
-#	app-portage/portage-utils
-#	app-arch/cpio
-#	>=app-misc/pax-utils-0.6
-#	!<sys-apps/openrc-0.9.9
-#	sys-apps/util-linux
-#	sys-block/thin-provisioning-tools
-#	sys-fs/lvm2"
-
-RDEPEND="${DEPEND}
-	!sys-kernel/genkernel
-	!sys-kernel/genkernel-next
-	cryptsetup? ( sys-fs/cryptsetup )
-	staticgpg? ( app-crypt/staticgpg )
-	zfs? ( sys-kernel/zfs )
-	app-portage/portage-utils
-	app-arch/cpio
-	>=app-misc/pax-utils-0.6
-	!<sys-apps/openrc-0.9.9
-	sys-apps/util-linux
-	sys-block/thin-provisioning-tools
-	sys-fs/lvm2"
-
-
-src_prepare() {
-	sed -i "/^GK_V=/ s:GK_V=.*:GK_V=${PV}:g" "${S}/genkernel" || \
-		die "Could not setup release"
-
-	epatch_user
-}
-
-src_install() {
-	emake DESTDIR="${D}" install || die "make install failed"
-
-	doman "${S}"/genkernel.8 || die "doman"
-	dodoc "${S}"/AUTHORS || die "dodoc"
-
-	newbashcomp "${S}"/genkernel.bash genkernel
-}

gen_initramfs.sh

@@ -590,7 +590,7 @@ append_gpg() {
     mkdir -p "${TEMP}/initramfs-gpg-temp/sbin/"
 
     print_info 1 "Including GPG support"
-    copy_binaries "${TEMP}/initramfs-gpg-temp" /usr/bin/staticgpg
+    copy_binaries "${TEMP}/initramfs-gpg-temp" /usr/bin/gpg
 
     cd "${TEMP}/initramfs-gpg-temp/"
     log_future_cpio_content