Rename DEBUGLEVEL/DEBUGFILE to LOGLEVEL/LOGFILE to help reduce confusion.

git-svn-id: svn+ssh://svn.gentoo.org/var/svnroot/genkernel/trunk@543 67a159dc-881f-0410-a524-ba9dfbe2cb84

ChangeLog

@@ -2,6 +2,11 @@
 # Copyright 2006-2007 Gentoo Foundation; Distributed under the GPL v2
 # $Header: $
 
+  17 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org> gen_cmdline.sh,
+  gen_compile.sh, gen_determineargs.sh, gen_funcs.sh, gen_initrd.sh,
+  genkernel, genkernel.8, genkernel.conf:
+  Rename DEBUGLEVEL/DEBUGFILE to LOGLEVEL/LOGFILE to help reduce confusion.
+
   17 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org> gen_cmdline.sh,
   gen_configkernel.sh, genkernel:
   Some more generalcleanup and adding support for using a config file other

gen_cmdline.sh

@@ -15,8 +15,8 @@ longusage() {
   echo "  Configuration settings"
   echo "	--config=<file>	genkernel configuration file to use"
   echo "  Debug settings"
-  echo "	--debuglevel=<0-5>	Debug Verbosity Level"
+  echo "	--loglevel=<0-5>	Debug Verbosity Level"
-  echo "	--debugfile=<outfile>	Output file for debug info"
+  echo "	--logfile=<outfile>	Output file for debug info"
   echo "	--color			Output debug in color"
   echo "	--no-color		Do not output debug in color"
   echo "  Kernel Configuration settings"
@@ -251,10 +251,10 @@ parse_cmdline() {
 			CMD_BOOTLOADER=`parse_opt "$*"`
 			print_info 2 "CMD_BOOTLOADER: ${CMD_BOOTLOADER}"
 			;;
-		--debuglevel=*)
+		--loglevel=*)
-			CMD_DEBUGLEVEL=`parse_opt "$*"`
+			CMD_LOGLEVEL=`parse_opt "$*"`
-			DEBUGLEVEL="${CMD_DEBUGLEVEL}"
+			LOGLEVEL="${CMD_LOGLEVEL}"
-			print_info 2 "CMD_DEBUGLEVEL: ${CMD_DEBUGLEVEL}"
+			print_info 2 "CMD_LOGLEVEL: ${CMD_LOGLEVEL}"
 			;;
 		--menuconfig)
 			TERM_LINES=`stty -a | head -n 1 | cut -d\  -f5 | cut -d\; -f1`
@@ -398,11 +398,11 @@ parse_cmdline() {
 			print_info 2 "USECOLOR: ${USECOLOR}"
 			setColorVars
 			;;
-		--debugfile=*)
+		--logfile=*)
-			CMD_DEBUGFILE=`parse_opt "$*"`
+			CMD_LOGFILE=`parse_opt "$*"`
-			DEBUGFILE=`parse_opt "$*"`
+			LOGFILE=`parse_opt "$*"`
-			print_info 2 "CMD_DEBUGFILE: ${CMD_DEBUGFILE}"
+			print_info 2 "CMD_LOGFILE: ${CMD_LOGFILE}"
-			print_info 2 "DEBUGFILE: ${CMD_DEBUGFILE}"
+			print_info 2 "LOGFILE: ${CMD_LOGFILE}"
 			;;
 		--kerneldir=*)
 			CMD_KERNELDIR=`parse_opt "$*"`

gen_compile.sh

@@ -216,16 +216,16 @@ compile_generic() {
 		print_info 2 "COMMAND: ${MAKE} ${MAKEOPTS/-j?/j1} ${ARGS} ${target} $*" 1 0 1
 		eval ${MAKE} -s ${MAKEOPTS/-j?/-j1} "${ARGS}" ${target} $*
 		RET=$?
-	elif [ "${DEBUGLEVEL}" -gt "1" ]
+	elif [ "${LOGLEVEL}" -gt "1" ]
 	then
-		# Output to stdout and debugfile
+		# Output to stdout and logfile
 		print_info 2 "COMMAND: ${MAKE} ${MAKEOPTS} ${ARGS} ${target} $*" 1 0 1
-		eval ${MAKE} ${MAKEOPTS} ${ARGS} ${target} $* 2>&1 | tee -a ${DEBUGFILE}
+		eval ${MAKE} ${MAKEOPTS} ${ARGS} ${target} $* 2>&1 | tee -a ${LOGFILE}
 		RET=${PIPESTATUS[0]}
 	else
-		# Output to debugfile only
+		# Output to logfile only
 		print_info 2 "COMMAND: ${MAKE} ${MAKEOPTS} ${ARGS} ${1} $*" 1 0 1
-		eval ${MAKE} ${MAKEOPTS} ${ARGS} ${target} $* >> ${DEBUGFILE} 2>&1
+		eval ${MAKE} ${MAKEOPTS} ${ARGS} ${target} $* >> ${LOGFILE} 2>&1
 		RET=$?
 	fi
 	[ "${RET}" -ne '0' ] &&
@@ -495,7 +495,7 @@ compile_lvm() {
 			LDFLAGS="-L${TEMP}/device-mapper/lib" \
 			CFLAGS="-I${TEMP}/device-mapper/include" \
 			CPPFLAGS="-I${TEMP}/device-mapper/include" \
-			./configure --enable-static_link --prefix=${TEMP}/lvm >> ${DEBUGFILE} 2>&1 ||
+			./configure --enable-static_link --prefix=${TEMP}/lvm >> ${LOGFILE} 2>&1 ||
 				gen_die 'Configure of lvm failed!'
 		print_info 1 'lvm: >> Compiling...'
 			compile_generic '' utils
@@ -536,7 +536,7 @@ compile_dmraid() {
 			LDFLAGS="-L${TEMP}/device-mapper/lib" \
 			CFLAGS="-I${TEMP}/device-mapper/include" \
 			CPPFLAGS="-I${TEMP}/device-mapper/include" \
-			./configure --enable-static_link --prefix=${TEMP}/dmraid >> ${DEBUGFILE} 2>&1 ||
+			./configure --enable-static_link --prefix=${TEMP}/dmraid >> ${LOGFILE} 2>&1 ||
 				gen_die 'Configure of dmraid failed!'
 				
 			# We dont necessarily have selinux installed yet... look into
@@ -600,7 +600,7 @@ compile_device_mapper() {
 			gen_die "device-mapper directory ${DEVICE_MAPPER_DIR} invalid"
 		cd "${DEVICE_MAPPER_DIR}"
 		./configure --prefix=${TEMP}/device-mapper --enable-static_link \
-			--disable-selinux >> ${DEBUGFILE} 2>&1 ||
+			--disable-selinux >> ${LOGFILE} 2>&1 ||
 			gen_die 'Configuring device-mapper failed!'
 		print_info 1 'device-mapper: >> Compiling...'
 		compile_generic '' utils
@@ -633,7 +633,7 @@ compile_e2fsprogs() {
 			gen_die "e2fsprogs directory ${E2FSPROGS_DIR} invalid"
 		cd "${E2FSPROGS_DIR}"
 		print_info 1 'e2fsprogs: >> Configuring...'
-		./configure  --with-ldopts=-static >> ${DEBUGFILE} 2>&1 ||
+		./configure  --with-ldopts=-static >> ${LOGFILE} 2>&1 ||
 			gen_die 'Configuring e2fsprogs failed!'
 		print_info 1 'e2fsprogs: >> Compiling...'
 		MAKE=${UTILS_MAKE} compile_generic "" ""

gen_determineargs.sh

@@ -78,9 +78,9 @@ get_KV() {
 }
 
 determine_real_args() {
-	if [ "${CMD_DEBUGFILE}" != '' ]
+	if [ "${CMD_LOGFILE}" != '' ]
 	then
-		DEBUGFILE="${CMD_DEBUGFILE}"
+		LOGFILE="${CMD_LOGFILE}"
 	fi
 
 	if [ "${CMD_MAKEOPTS}" != '' ]

gen_funcs.sh

@@ -43,10 +43,10 @@ setColorVars
 
 dump_debugcache() {
 	TODEBUGCACHE=0
-	echo "${DEBUGCACHE}" >> ${DEBUGFILE}
+	echo "${DEBUGCACHE}" >> ${LOGFILE}
 }
 
-# print_info(debuglevel, print [, newline [, prefixline [, forcefile ] ] ])
+# print_info(loglevel, print [, newline [, prefixline [, forcefile ] ] ])
 print_info() {
 	local NEWLINE=1
 	local FORCEFILE=0
@@ -91,9 +91,9 @@ print_info() {
 		fi
 	fi
 
-	# PRINT TO SCREEN ONLY IF PASSED DEBUGLEVEL IS HIGHER THAN
+	# PRINT TO SCREEN ONLY IF PASSED LOGLEVEL IS HIGHER THAN
 	# OR EQUAL TO SET DEBUG LEVEL
-	if [ "$1" -lt "${DEBUGLEVEL}" -o "$1" -eq "${DEBUGLEVEL}" ]
+	if [ "$1" -lt "${LOGLEVEL}" -o "$1" -eq "${LOGLEVEL}" ]
 	then
 		SCRPRINT='1'
 	fi
@@ -142,13 +142,13 @@ print_info() {
 			if [ "${TODEBUGCACHE}" -eq 1 ]; then
 				DEBUGCACHE="${DEBUGCACHE}${STR}"
 			else
-				echo -ne "${STR}" >> ${DEBUGFILE}
+				echo -ne "${STR}" >> ${LOGFILE}
 			fi	
 		else
 			if [ "${TODEBUGCACHE}" -eq 1 ]; then
 				DEBUGCACHE="${DEBUGCACHE}${STR}"$'\n'
 			else
-				echo "${STR}" >> ${DEBUGFILE}
+				echo "${STR}" >> ${LOGFILE}
 			fi
 		fi
 	fi
@@ -194,9 +194,9 @@ cache_replace() {
 }
 
 clear_log() {
-    if [ -f "${DEBUGFILE}" ]
+    if [ -f "${LOGFILE}" ]
     then
-	(echo > "${DEBUGFILE}") 2>/dev/null || small_die "Genkernel: Could not write to ${DEBUGFILE}."
+	(echo > "${LOGFILE}") 2>/dev/null || small_die "Genkernel: Could not write to ${LOGFILE}."
     fi   
 }
 
@@ -213,20 +213,20 @@ gen_die() {
 
 	if isTrue ${USECOLOR}
 	then
-		GREP_COLOR='1' grep -B5 -E --colour=always "([Ww][Aa][Rr][Nn][Ii][Nn][Gg]|[Ee][Rr][Rr][Oo][Rr][ :,!]|[Ff][Aa][Ii][Ll][Ee]?[Dd]?)" ${DEBUGFILE}
+		GREP_COLOR='1' grep -B5 -E --colour=always "([Ww][Aa][Rr][Nn][Ii][Nn][Gg]|[Ee][Rr][Rr][Oo][Rr][ :,!]|[Ff][Aa][Ii][Ll][Ee]?[Dd]?)" ${LOGFILE}
 	else
-		grep -B5 -E "([Ww][Aa][Rr][Nn][Ii][Nn][Gg]|[Ee][Rr][Rr][Oo][Rr][ :,!]|[Ff][Aa][Ii][Ll][Ee]?[Dd]?)" ${DEBUGFILE}
+		grep -B5 -E "([Ww][Aa][Rr][Nn][Ii][Nn][Gg]|[Ee][Rr][Rr][Oo][Rr][ :,!]|[Ff][Aa][Ii][Ll][Ee]?[Dd]?)" ${LOGFILE}
 	fi
 	echo
 	print_info 1 "-- End log... --"
 	echo
-	print_info 1 "Please consult ${DEBUGFILE} for more information and any"
+	print_info 1 "Please consult ${LOGFILE} for more information and any"
 	print_info 1 "errors that were reported above."
 	echo
 	print_info 1 "Report any genkernel bugs to bugs.gentoo.org and"
 	print_info 1 "assign your bug to genkernel@gentoo.org. Please include"
 	print_info 1 "as much information as you can in your bug report; attaching"
-	print_info 1 "${DEBUGFILE} so that your issue can be dealt with effectively."
+	print_info 1 "${LOGFILE} so that your issue can be dealt with effectively."
 	print_info 1 ''
 	print_info 1 'Please do *not* report compilation failures as genkernel bugs!'
 	print_info 1 ''

gen_initrd.sh

@@ -6,11 +6,11 @@ create_initrd_loop() {
 	[ "$#" -ne '1' ] && gen_die 'create_initrd_loop(): Not enough arguments!'
 	mkdir -p ${TEMP}/initrd-mount ||
 		gen_die 'Could not create loopback mount directory!'
-	dd if=/dev/zero of=${TMPDIR}/initrd-${KV} bs=1k count=${1} >> "${DEBUGFILE}" 2>&1 ||
+	dd if=/dev/zero of=${TMPDIR}/initrd-${KV} bs=1k count=${1} >> "${LOGFILE}" 2>&1 ||
 		gen_die "Could not zero initrd-${KV}"
-	mke2fs -F -N750 -q "${TMPDIR}/initrd-${KV}" >> "${DEBUGFILE}" 2>&1 ||
+	mke2fs -F -N750 -q "${TMPDIR}/initrd-${KV}" >> "${LOGFILE}" 2>&1 ||
 		gen_die "Could not format initrd-${KV}!"
-	mount -t ext2 -o loop "${TMPDIR}/initrd-${KV}" "${TEMP}/initrd-mount" >> "${DEBUGFILE}" 2>&1 ||
+	mount -t ext2 -o loop "${TMPDIR}/initrd-${KV}" "${TEMP}/initrd-mount" >> "${LOGFILE}" 2>&1 ||
 		gen_die 'Could not mount the initrd filesystem!'
 }
 
@@ -22,7 +22,7 @@ create_initrd_unmount_loop() {
 
 move_initrd_to_loop() {
 	cd "${TEMP}/initrd-temp"
-	mv * "${TEMP}/initrd-mount" >> ${DEBUGFILE} 2>&1
+	mv * "${TEMP}/initrd-mount" >> ${LOGFILE} 2>&1
 }
 
 # check for static linked file with objdump

genkernel

@@ -7,7 +7,7 @@ GK_V='3.4.9_pre3'
 # --tempdir command line option.
 TMPDIR='/var/tmp/genkernel'
 
-TODEBUGCACHE=1 # Until an error occurs or DEBUGFILE is fully qualified.
+TODEBUGCACHE=1 # Until an error occurs or LOGFILE is fully qualified.
 
 small_die() {
   echo $1
@@ -290,7 +290,7 @@ then
 	then
 		echo
 		echo
-		eval ${CMD_CALLBACK} | tee -a ${DEBUGFILE}
+		eval ${CMD_CALLBACK} | tee -a ${LOGFILE}
 		CMD_STATUS="${PIPESTATUS[0]}"
 		echo
 		print_info 1 "<<< Callback exit status: ${CMD_STATUS}"

genkernel.8

@@ -49,12 +49,12 @@ do the opposite thing. You can specify your options in any order.
 .PP
 .BR Debugging \ Options
 .TP
-\fB\-\-debuglevel=\fR<0-5>
+\fB\-\-loglevel=\fR<0-5>
 This controls the out verbosity level of genkernel output - if this is set
 to 0, minimal debugging is done; if this is set to 5 as much output as
 possible is given.
 .TP
-\fB\-\-debugfile=\fR<outfile>
+\fB\-\-logfile=\fR<outfile>
 This outputs debugging data to the file <outfile>. By default this is
 .I /var/log/genkernel.log\fR.
 .TP

genkernel.conf

@@ -70,9 +70,9 @@ GK_SHARE="/usr/share/genkernel"
 # Location of the default cache
 CACHE_DIR="/var/cache/genkernel/%%ARCH%%"
 # Log output file
-DEBUGFILE="/var/log/genkernel.log"
+LOGFILE="/var/log/genkernel.log"
 # Debug Level
-DEBUGLEVEL=1
+LOGLEVEL=1
 
 # Default location of kernel source
 DEFAULT_KERNEL_SOURCE="/usr/src/linux"